galvanized reinforcement square mesh
galvanized reinforcing rectangular mesh
welded reinforcing concrete mesh from deformed steel

Reinforcing concrete mesh - integral concrete structures component

Cetkan offers reinforcing concrete mesh. We cooperate with wholesale and construction companies, owners of farms and suburban areas.

Welded mesh reinforcement bars are from 3 to 40 mm diameter, located in mutually perpendicular direction and forming a square or rectangular shape mesh. Reinforcing mesh opening size ranging from 50 mm to 250 mm . Distinguish heavy reinforcing mesh (diameter rods of 12 mm and above) and light meshes (the diameter of the rods from 3mm up to 12mm).

When choosing a wire mesh, material, mesh sheet size, mesh opening, and the purpose must be taken into account. For example, if you need concrete mesh for plastering, the thin wire mesh is suitable.

Cetkan concrete reinforcing mesh specification:
Materials: stainless steel rebar, galvanized steel rods.
Diameter: 3mm - 40mm.
Steel rods style: ribbed or smooth.
Mesh opening shape: square or rectangular.
Distance between rods 100 , 200, 300 , 400 and 500mm.
Mesh sheet width 065m - 3.8 m, and length from 850mm, 6m, 9m, 12m.
Mesh sizes 6.0m×2.4m, 4.80m×2.4m, 3.6m×2m, 2m×4m.

The reinforcing steel mesh has become an integral component of reinforced concrete structures and is used to enhance them, catalog as below

  • Mesh reinforcement for the foundation, In the civil and industrial construction special attention and increased demands placed on the quality of the foundation, because it depends on the operational safety and durability of structures.
  • Masonry reinforcement mesh - the most popular type of wire mesh . It is referred to the building grid and used as a reinforcing element in the construction of reinforced concrete and masonry buildings. Masonry reinforcement mesh increases the strength of the structure and quality of plastering work. For the manufacture of masonry reinforcement wire mesh used steel wire diameter of 3 to 5 mm. The mesh size ranges from 50 mm to 250 mm.
  • Mesh reinforcement for the floor. This mesh is packaged in roll form. It is very convenient for delivery, because the diameter of the wire used is relatively small. The length of such a mesh size not more than two meters, which facilitates its transportation.
  • Reinforcement mesh used in road works to strengthen the road surface. This mesh is made from stainless steel with diameter of 3mm, 4mm, or 5mm. Its composition with low carbon content allows qualitatively strengthen road terrain. The reinforcing road mesh is the most cost-effective option for construction and repair of roads, bridges, and large industrial plants. Usually, road mesh opening in sizes 50×50 mm, 100×100 mm, 125×125 mm, 150×150 mm. Its sheet sizes may be 1.5×2m, 2×3m, 2×6m.
  • Trench mesh is long, narrow sheets of concrete reinforcing mesh, ideally sizes for trenches, paths or other narrow spaces. Its longitudinal wires (main wire ) from 7.6mm up to 15.6 mm diameter, and cross wire in 4mm or 4.77mm diameter. Trench rib mesh all comes 6.0m length.

Brick wall reinforced mesh also named concrete slab mesh is a kind of welded wire mesh panel for reinforced concrete uses. It covers truss mesh reinforcement and ladder mesh reinforcement.

In addition to above mentioned reinforcement concrete mesh, reinforcing deformed bar and smooth bar, steel bar chair, beam bolster, slab bolster, rebar supports and rebar tie wire, prefabricated round or square shaped cages are also in our company manufacture range.

Typical dimensions of the welded mesh reinforcement sheet are the following values: 6.0m×2.4m, 4.8m×2.4m, 3.6m×2m, 2m×4m. But we also can produce mesh with different sheet sizes and different mesh opening size depending on the customers' wishes. Delivery usually made in sheet, but also can be delivered in rolls.

The cost of reinforcing concrete mesh depends on the mesh size, the wire diameter and the type of coating. To find out the price for the products just mail to mesh@concrete-mesh.com Managers will provide you with all the information you need on the availability and cost.

Search

Technology

Hot Products

Concrete Slab Mesh

Concrete slab mesh is used for block slab, hollowed slabs and wall reinforcement, in 6m×2.4m sheet in 200mm or 100mm square reinforced mesh

Concrete Reinforcing Mesh

Concrete reinforcing mesh welded from 3 to 40 mm steel rods used for concrete footpaths and ground slabs construction, in galvanized and SS materials.

Rectangular Reinforcing Mesh

Rectangular reinforcing mesh reinforces thin concrete elements such as floor slabs and walls where more strength is required in one direction than the other.

Square Reinforcing Mesh

Square reinforcing mesh from superior quality ribbed steel rebar welded in 100mm or 200mm mesh opening, used in bridges , highway and wall reinforcement